Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : How to reset the tire pressure sensor of the 2022 Toyota Aygo

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Instrument cluster
Operation: How to reset the tire pressure sensor of the 2022 Toyota Aygo

To reset the tire pressure warning light of your Toyota Aygo Mk2 (year 2022), you just need to follow the steps described in the following guide dedicated to you. First of all, reach the driver's seat and turn on the instrument panel, then press the menu button located on the left side of the steering wheel. At this point, scroll through the various options and select "Vehicle settings". Then enter "TPWS setting" and press "Set pressure". Finally, confirm the operation and a few moments later the manual reset procedure is successfully completed.


Posted on 28 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Aygo 2014-2023 - What features does the Toyota Aygo have? Read Answer
    • Aygo 2005-2014 - What does the red airbag warning light on the Toyota Aygo indicate? Read Answer
    • Aygo 2014-2023 - What does the tire warning light on Toyota Aygo Mk2 mean? Read Answer
    • Aygo 2014-2023 - What to do if the tire light comes on in Toyota Aygo? Read Answer
    • Aygo 2014-2023 - What spies does the Toyota Aygo have? Read Answer
    • Aygo 2014-2023 - Where is the Toyota Aygo fuel gauge located? Read Answer
    • Aygo 2005-2014 - What to do to turn off the Toyota Aygo tire pressure warning light? Read Answer
    • Aygo 2014-2023 - What does the Toyota Aygo tire pressure warning light mean? Read Answer
    • Aygo 2005-2014 - Meaning ps Citroen Toyota Aygo spy? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos