Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the rear camera of the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016

In this guide, we will see the instructions that will allow us to install the rear camera of the Volkswagen Tiguan. First, we get on board the car and start installing the display compatible with our camera; then we pass the cables to the rear camera, as shown in the video. At this point, we perfectly install the camera on the trunk door, removing the internal plastic lining; we verify that the view of the rear camera is well centered, following the video tutorial until the end!

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Install a Reversing Camera on a Volkswagen Tiguan?
How to Install a Reversing Camera on a Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To install a reversing camera on the Volkswagen Tiguan, open the boot compartment and remove the CD player using the appropriate tools. This will all…
How to Install the Rear Camera on the Volkswagen Tiguan?
How to Install the Rear Camera on the Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To install the rear camera on the Volkswagen Tiguan, open the tailgate to access the screws securing the plastic panels of the outer trim. These scre…
How to Activate the Reverse Camera on a Volkswagen Tiguan
How to Activate the Reverse Camera on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) These brief and simple steps will show you how to activate the rear camera for reversing on a Volkswagen Tiguan. In models equipped with a rear camer…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos