Do it yourself
Frequently asked questions about cars and motorcycles

How do you open the hood of the Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Checks and maintenance

In order to open the hood of the Volkswagen Polo, you will need to go inside the car and unlock all the locks with the remote control: once you have access to this area, you will notice that there is a lever on the dashboard below the steering column: this lever must be pulled to unlock the hood locking mechanism. At this point, you can insert your hand under the hood to move the latch of the mechanism and lift the hood: at this point, you can access the components in the engine compartment.

Posted on 1 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today we will explain how to open the front hood of the Volkswagen Polo V. Before opening the front hood, make sure to park the vehicle on a flat sur…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) On the Volkswagen Polo, the hood opens in two steps. The video starts from the cabin: you go down towards the pedal area on the driver's side and pul…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To open the engine hood of a Volkswagen Polo, you must first locate the internal release lever located near the steering column, usually on the left …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos