|
Do it yourself
| |||
| ||||
Repairing the Window Regulator Motor and Removing the Door Panel
Model: Volkswagen New Beetle
MK 2, 9C
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Before proceeding with disassembly, lower the window by about 5 cm (this aligns the locking pins of the glass with the corresponding access holes for the key). Detach the cover of the internal handle and unscrew the screws located at both ends (it is suggested to use a magnet to extract them); remove the other screws located just below the lower edge of the panel and detach the panel by pulling it upwards to extract it from the glass scraper seal and disconnecting the connectors attached to it. Loosen the pins of the glass securing clips and pull the glass up, securing it to the door frame with tape. Unscrew the securing pins of the soundproofing panel and, after disconnecting the various cable pass-throughs, the window regulator motor, and other connectors, remove it and place it on a workbench. In this case, there is a repair kit for the window regulator system that includes not only the cord system with stop springs but also the plastic sliders and glass clips. Proceed with the repair by installing the kit and reassembling everything.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Volkswagen New Beetle
(1999-2012 /
MK 2, 9C)
In this guide, we will explore the instructions that will allow us to repair the window regulator motor on the Volkswagen New Beetle. First, get into…
Volkswagen New Beetle
(1999-2012 /
MK 2, 9C)
Replacing the window regulator motor on a New Beetle? Remove the cover panel to access the window regulator motor. Unscrew the internal door handle a…
Volkswagen New Beetle
(1999-2012 /
MK 2, 9C)
Remove the door cover panel to replace the window regulator motor on a New Beetle? Unscrew the screws of the internal door handle after removing the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Adjust the Headlights on a Volkswagen Golf 7
This brief video tutorial shows the necessary steps to manually adjust the headlights on a seventh-generation Volkswagen Golf, produced from 2012 to 2019. Adjusting the dipped beam headlights is a very simple task. Open the bonnet and locate the adjustment screw at the back of the headlights as shown in the video. Once located, use a 6 mm Allen key to turn the screw clockwise or anti-clockwise to raise or lower the beam. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.102
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |