Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator on a New Beetle Cabriolet

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Power window motor

Replacing the window regulator motor on a New Beetle? Remove the cover panel to access the window regulator motor. Unscrew the internal door handle after removing the cover. Detach the door panel and disconnect the window regulator connectors. Be careful not to lose any clips behind the plastic panel. Now that you have removed the door panel, peel off the cover from the door, unscrew the window regulator motor and the sliding rail. Replace the damaged part with a new one. Reassemble the cover panel and test the operation of the window regulator.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen New Beetle (1999-2012 / MK 2, 9C) Remove the door cover panel to replace the window regulator motor on a New Beetle? Unscrew the screws of the internal door handle after removing the …
Volkswagen New Beetle (1999-2012 / MK 2, 9C) To replace the window regulator on the Volkswagen New Beetle, first loosen the two screws securing the door panel at the bottom. Once these screws ar…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Below are the instructions to remove and replace the window regulator motor on a Volkswagen New Beetle in simple steps. First, open the front door of…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos