Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator Mechanism of the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the window regulator mechanism of the Volkswagen New Beetle in simple steps. First, open the front door of the vehicle and start unscrewing all the screws securing the door panel, also removing the plastic covers to detach and remove it; then disconnect all the wiring of the window motor, also disconnecting the side glass, as illustrated in the video.

At this point, remove and replace the motor or window regulator mechanism if necessary, following the video tutorial until the end!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to recalibrate the motor and window mechanism of the Volkswagen New Beetle
How to recalibrate the motor and window mechanism of the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) In this brief guide, you will see the instructions that will allow you to recalibrate the motor and window mechanism of the Volkswagen New Beetle. Fi…
How to replace the motor and window lift mechanism of the Volkswagen New Beetle
How to replace the motor and window lift mechanism of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) The following steps will show us how to disassemble and replace the motor and window lift mechanism of the Volkswagen New Beetle. First, let's open t…
How to Replace the Window Regulator Mechanism on a Volkswagen New Beetle?
How to Replace the Window Regulator Mechanism on a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this tutorial, you will learn how to replace the window regulator mechanism on a Volkswagen New Beetle, a simple operation but one that requires g…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos