Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the hood lock cable of the Volkswagen Passat CC

Model: Volkswagen Passat Cc MK 1 - Years 2008-2018

The following steps will show us how to disassemble and replace the hood lock cable of the Volkswagen Passat CC. First, we open the front door of the car and start removing the plastic cover of the hood lock lever; we unscrew the fastening screws to disconnect the cable from the lever, as shown in the video. At this point, we open the hood and then disconnect the cable from the lock pin, removing it and replacing it with the new one; we secure the wiring on both ends and check its operation, following the video tutorial until the end!

Posted on 15 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to program the key fob remote of the Volkswagen Passat CC
How to program the key fob remote of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) In this guide, we will see the main instructions on how to program the remote control key of the Volkswagen Passat CC. First, we remove the plastic c…
How to Open a Stuck Boot Lid on a Volkswagen Passat CC?
How to Open a Stuck Boot Lid on a Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) On a Volkswagen Passat, the boot lid may become stuck due to a problem with the control button or the lock actuator. In such cases, you can still per…
How to Open the Door with the Key Fob on Volkswagen Passat CC
How to Open the Door with the Key Fob on Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) How to open the door of your car with the metal key fob located in the remote on Volkswagen Passat CC? Take your remote and press the button to exten…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos