Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the trunk lock of the Volkswagen Touran

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Trunk lock

Below are the instructions that will allow us to disassemble and replace the trunk lock of the Volkswagen Touran. First, we open the rear hatch of the trunk and start by removing the inner plastic panel, unscrewing the fastening screws. Then, we remove the lock button, unscrewing the screws of the trunk lock to remove it, as shown in the video. At this point, we clean or directly replace the components with new ones, applying the reverse process for reassembly!

Posted on 19 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the central locking system of the Volkswagen Touran?
How do you reset the central locking system of the Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) In order to reset the central locking system of the Volkswagen Touran, you need to connect a diagnostic tool to the OBD port of the vehicle, which is…
How to open the trunk of the VW Touran in an emergency
How to open the trunk of the VW Touran in an emergency
Volkswagen Touran (2003-2015 / MK 1, 1T) When the trunk lock of the 2009 Volkswagen Touran stops working, it means that it needs to be replaced. However, to perform this operation, it is nec…
How do you reset the central locking system of the Volkswagen Touran?
How do you reset the central locking system of the Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) In order to reset the central locking system of the Volkswagen Touran, you need to turn on the instrument panel by inserting the ignition key into th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos