Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Service warning light

You can reset the Service light that is shown on the instrument panel of the Volkswagen Polo by holding down the 0.0/SET button located in the center of the instrument panel. While holding it down, you can turn the key so that the instrument panel lights up; the wrench light will still be activated. Therefore, you can release the 0.0/SET button and immediately press the OK button next to the one previously pressed. This will turn off the light and you can verify it by turning off and on the instrument panel again.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volkswagen Polo?
How do you reset the Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) On the instrument panel of the Volkswagen Polo, the Service light can be reset by pressing the button located immediately below the instrument panel …
How to reset the Service light on a Volkswagen Polo?
How to reset the Service light on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To reset the Service light on a Volkswagen Polo, press and hold the Trip button while the key is not inserted in the ignition. Then, insert the key i…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To reset the service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument cluster while it is off. Then,…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos