Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dashboard Lights on a Volkswagen Polo 6N2

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Instrument panel light

In today's video, follow the instructions to remove and replace the dashboard bulbs on the Volkswagen Polo 6N2. First, get inside the vehicle and start by removing the instrument cluster; to do this, unscrew the fixing screws located at the top of the cluster, removing the plastic cover. Next, disconnect the electrical connector found behind the instrument cluster; then remove the rear cover to access the bulbs, replacing them with new ones, following the video tutorial to the end!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Polo 6N2?
How to Reset the Service Light on a Volkswagen Polo 6N2?
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Have you turned on the instrument cluster of your Volkswagen Polo 6N2 and the service light has come on? No problem, perform a service (even DIY if y…
Removing Window Regulator Motor from Volkswagen Polo 6N2
Removing Window Regulator Motor from Volkswagen Polo 6N2
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In this video tutorial, learn how to remove the window regulator motor from a first series Volkswagen Polo, the 6N2. First, open the door and remove …
How to Replace the Indicator Relay on Volkswagen Polo 6N2
How to Replace the Indicator Relay on Volkswagen Polo 6N2
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In this video tutorial, you will learn how to remove and replace the indicator relay on a Volkswagen Polo 6N2 by following these simple steps. First,…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos