Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Relay on Volkswagen Polo 6N2

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the indicator relay on a Volkswagen Polo 6N2 by following these simple steps. First, open the bonnet of your car and disconnect the battery terminals.

Next, get inside the vehicle and remove the radio by disconnecting the electrical connector and the antenna cable. At this point, remove the radio support and locate the indicator relay; simply remove it and replace it with the new one. Then, apply the reverse procedure for reassembly!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Remove the Cup Holder on the Volkswagen Polo 6N2
How to Remove the Cup Holder on the Volkswagen Polo 6N2
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) In this video tutorial, you will see how to remove and replace the dashboard cup holder on the Volkswagen Polo 6N2 in simple and quick steps. First, …
How to Remove the Front Seat of the Volkswagen Polo 6N2
How to Remove the Front Seat of the Volkswagen Polo 6N2
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) To replace the front seat of the Volkswagen Polo 6N2, use a flathead screwdriver to pull out the retaining clip located at the lower centre of the se…
How to Change the Dashboard Lights on a Volkswagen Polo 6N2
How to Change the Dashboard Lights on a Volkswagen Polo 6N2
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) In today's video, follow the instructions to remove and replace the dashboard bulbs on the Volkswagen Polo 6N2. First, get inside the vehicle and sta…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos