Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : Replace the Volkswagen Polo instrument cluster bulbs

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Dashboard light
Operation: Replace the Volkswagen Polo instrument cluster bulbs

In today's video tutorial we will see the main instructions on how to disassemble and replace the bulbs of the dashboard instrument cluster of the Volkswagen Polo. First of all, we get on board the car and begin to disassemble our instrument panel; to do this, unscrew the fixing screws that we find on the inside of the front fairing and on the sides, as shown in the video. At this point we disconnect the electrical connectors on the back to access the small bulb bulbs; remove them and replace them with new ones, inserting them in the correct direction, applying the reverse procedure for reassembly!


Posted on 13 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos