Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb of a Volkswagen Polo

Model: Volkswagen Polo Polo 4, Polo IV, MK IV, MK 4, 9N - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

Video tutorial

The instructions in this guide will allow you to remove and replace the front headlight bulb of a Volkswagen Polo. First, open the bonnet of the vehicle and start by removing the plastic protective cover of the bulbs found behind the headlamp; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video.

At this point, remove and replace the dipped or main beam bulb, installing the new one (with the same fitting); check the operation of the bulbs!


Posted on 14 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK 5, Polo 5, Polo V, MK V) Today, we will replace the front headlight bulb on the Volkswagen Polo model 5. To carry out the replacement, we first need to remove the headlight. …
How to replace the headlight bulb of the Volkswagen Polo 5
How to replace the headlight bulb of the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK 5, Polo 5, Polo V, MK V) In this new guide of ours, we will discover together how to correctly replace the headlight bulb of your Volkswagen Polo Mk5. First of all, you need …
How to Change the Headlight Bulb on a VW Polo
How to Change the Headlight Bulb on a VW Polo
Volkswagen Polo (2009-2017 / 6R, MK 5, Polo 5, Polo V, MK V) How do you change the front headlight bulb on your car? Here's how to remove the headlight bulb from a Polo. Open the bonnet of the engine compartmen…

Other guides you may be interested in

How to reset the tyre warning light in the Jeep Avenger?

In this tutorial, you will learn how to reset the tyre warning light in the Jeep Avenger, a very simple and quick operation to perform only after restoring the correct pressure in each tyre. First, enter the cabin, then insert the key and turn on the ignition. Next, navigate to the general menu on the main display, go to "Settings", "Vehicle", "Safety", "Tyre Pressure Configuration", and perform the reset using the appropriate option. To complete the procedure, simply restart the ignition.

Watch the video!


by ScegliAuto

More videos