Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the broken tailgate actuator of the Volkswagen Golf MK7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Door lock

In this video we see how to replace the damaged actuator of the tailgate of the Volkswagen Golf MK7: following the video we open the tailgate and remove the four screws indicated in the inner cover, then we remove the electrical connectors at the lock and remove the cap, then we lift the part with the emblem and see that there is a broken piece inside. Instead of choosing the easiest way to change the entire lock, the youtuber chooses to repair the electrical contacts. A suitable path for those with electrical knowledge and dexterity, and that can be found at a very low price in any electronics store. Once the contact is repaired, we reassemble the cap and reposition the lock, electrical connectors and fixing screws.

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To remove the tailgate lock on the Volkswagen E-Golf, open the tailgate so you can detach the panel inside it: by unscrewing the appropriate bolts, t…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This video shows where the air recirculation actuator is located in the Volkswagen Golf MK7, useful if you need to repair or replace it directly. As …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, you can see how to replace the heater actuator in the Volkswagen Golf Mk7, a very simple and quick operation. Before proceeding, en…

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos