Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Volkswagen Polo's cabin fan resistor

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

Below we will see the steps that will allow us to disassemble and replace the resistor of the cabin fan of the Volkswagen Polo. First, we get on board the vehicle, on the passenger side, and start unscrewing the fixing screws that we find under the glove compartment, unscrewing the screws inside and then removing it; in this way we will have access to the cabin fan, disconnecting the electrical connector of the resistor to remove it, as shown in the video.

At this point we install and connect the cabin fan, verifying the correct operation at various speeds.


Posted on 19 July 2025 by ScegliAuto


Related tutorials

Removing the Cabin Fan Resistor on a Volkswagen Polo
Removing the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Do you want to remove the air fan resistor? Let's see how to remove the resistor from inside the front dashboard of the Polo. Unscrew the securing sc…
Replacing the Cabin Fan Resistor on a VW Polo 9N
Replacing the Cabin Fan Resistor on a VW Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) If the cabin fan does not activate or remains stuck at one speed, the resistor that controls the speed is likely damaged. This resistor is located on…
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos