Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan Resistor on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Blower motor

See other generations:
Video tutorial

Do you want to remove the air fan resistor? Let's see how to remove the resistor from inside the front dashboard of the Polo. Unscrew the securing screws around the glove compartment: remove the glove compartment from inside the dashboard. Disconnect the large connector of the resistor, then extract it from the cabin.

Insert a new fan resistor into the dashboard compartment (connect the power connector). Refit the glove compartment and tighten the screws.

Check the correct fitting of the previously installed parts and test the correct operation of the air using the controls.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…
How to Replace the Cabin Fan Resistor in the Volkswagen Polo
How to Replace the Cabin Fan Resistor in the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow these steps to disassemble and replace the cabin fan resistor in the Volkswagen Polo. First, get inside the vehicle and start by removing the …
Replacement of the Volkswagen Polo's cabin fan resistor
Replacement of the Volkswagen Polo's cabin fan resistor
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Below we will see the steps that will allow us to disassemble and replace the resistor of the cabin fan of the Volkswagen Polo. First, we get on boar…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos