Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor in the Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017

Follow these steps to disassemble and replace the cabin fan resistor in the Volkswagen Polo. First, get inside the vehicle and start by removing the glove compartment; to do this, unscrew the screws on the sides as shown in the video. Once the glove compartment is removed, you can take out the resistor from the cabin fan by disconnecting its electrical connector; then install the new resistor and check the proper functioning of the fan by reassembling everything!

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…
Replacement of the Volkswagen Polo's cabin fan resistor
Replacement of the Volkswagen Polo's cabin fan resistor
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Below we will see the steps that will allow us to disassemble and replace the resistor of the cabin fan of the Volkswagen Polo. First, we get on boar…
How to Replace the Fan Resistor on a Volkswagen Polo
How to Replace the Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) How do you replace the fan resistor fitted on a Volkswagen Polo? In this video, learn how to carry out the disassembly. Use a lever to remove the pla…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos