Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the radio of the Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

To replace the radio of the Volkswagen Golf, you need to use an object to lever off the trim panel surrounding the device, in the central part of the dashboard: once the panel is removed, you will be able to locate the screws underneath that secure the radio to its housing.

Once all the screws are loosened, you can proceed by removing the device from its slot and then disconnecting the connectors at the back: you can then connect the new device to them, securing it and covering it properly with the panel.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
How to Remove the Standard Radio from a Volkswagen Golf
How to Remove the Standard Radio from a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Follow these simple and quick steps to remove and replace the standard radio from a Volkswagen Golf. First, get inside the vehicle; to extract the ra…
How do you replace the car radio in a Volkswagen Golf 6?
How do you replace the car radio in a Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Essentially, the car radio in vehicles produced a few years ago, such as the Volkswagen Golf 6, is being replaced to make way for newer and more comp…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos