Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service in the Volkswagen Transporter van?

Model: Volkswagen Transporter MK 6, T6 - Years 2014-2025
Part: Service warning light

In this tutorial we can see how to reset the service in the Volkswagen Transporter van, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First of all, let's go inside the cabin, then insert the key but leave it in the initial position. Then activate the hazard lights, hold down the "0.0/SET" button located on the right side of the dashboard, turn on the instrument panel at the same time, and, in the screen that has just appeared, select "OK". If we want to reset the oil service, just repeat the procedure with the hazard lights off.

Posted on 5 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (2014-2025 / MK 6, T6) To reset the "service" light in your Volkswagen Transporter T6, the steps are very simple and are as follows. First, turn on the ignition, and using …
Volkswagen Transporter (2003-2014 / T5, MK 5) To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…
Volkswagen Transporter (2014-2025 / MK 6, T6) It will be possible to completely delete the Service light that is shown on the instrument panel of the Volkswagen Transporter by holding down the 0.…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - How do you turn off the service light in the Volkswagen Transporter T6? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos