Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service in a Volkswagen Transporter Van?

Model: Volkswagen Transporter MK 6, T6 - Years 2014-2025
Part: Service warning light

In this tutorial, you will see how to reset the service in a Volkswagen Transporter van, a very simple and quick operation, to be performed only after completing all required scheduled maintenance work. Start by entering the cabin, then insert the key but leave it in the initial position. Next, press the "0.0/SET" button located to the right of the dashboard, simultaneously turn on the instrument cluster, and when the screen changes, select "OK". Afterwards, verify that the reset was successful by restarting the vehicle.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / MK 6, T6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
How to reset the "Service" light on a Volkswagen Transporter T5?
How to reset the "Service" light on a Volkswagen Transporter T5?
Volkswagen Transporter (2003-2014 / T5, MK 5) To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…
How to reset the Service light on the Volkswagen Transporter?
How to reset the Service light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / MK 6, T6) To reset the Service light on the Volkswagen Transporter, press and hold the 0.0 button located on the right side of the instrument cluster while it …

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - How do you turn off the service light in the Volkswagen Transporter T6? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos