|
Do it yourself
| |||
| ||||
How do you reset the Service light on the Volkswagen Polo?
Model: Volkswagen Polo
Polo VI, Polo 6, MK 6, AW1, MK VI
- Years 2017-2025
To completely remove the Service indicator light shown on the Volkswagen Polo instrument panel, you will need to press the button located immediately below the instrument panel on the left side. Then, insert the key and turn it to turn on the display without starting the engine. After these two operations have been completed, the message "Reset oil service?" will appear on the display. Pressing the button below the instrument panel on the right side will display the confirmation message "Service interval reset". Finally, to confirm the reset of the indicator light, you will need to turn off the instrument panel and turn it back on.
Posted on 5 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2017-2025 /
Polo VI, Polo 6, MK 6, AW1, MK VI)
This tutorial shows the procedure to reset the service light on a Volkswagen Polo. This is useful if the light remains on even after performing the s…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
Volkswagen Polo
(2017-2025 /
Polo VI, Polo 6, MK 6, AW1, MK VI)
To reset the Service light on a Volkswagen Polo, you need to turn on the instrument cluster so you can navigate through the menu options on the onboa…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.130
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
