|
Do it yourself
| |||
| ||||
How to reset the tire pressure on a Volkswagen Transporter T6
Model: Volkswagen Transporter
MK 6, T6
- Years 2014-2025
Let's see how to reset the tire pressure monitoring system (TPMS) on a Volkswagen Transporter T6: reach the correct cold pressure, with the recommended values on the driver's door jamb, start the car without starting the engine, then on models with touchscreen press the "car" button (use the steering wheel scroll for models without a screen). Select "vehicle settings" and then "tire pressure" at this point choose "reset" and confirm with "yes" drive for ten minutes and the system will automatically calibrate the new values. For models without a touchscreen, hold down the "set" button (located on the dashboard or under the steering wheel) until you hear a "beep" release and wait for confirmation on the display. If the light remains on, then a tire may be flat, or one of the sensors may be faulty.
Posted on 11 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to go inflate the tires, bringing them to the recommended p…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to inflate the tires until they reach the correct pressure …
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
Following these brief and simple steps, we will see how to reset the tire pressure warning of the Volkswagen Transporter; before performing the reset…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.093
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |