Do it yourself
Frequently asked questions about cars and motorcycles

How to understand the load index of the tires of the Volkswagen Transporter T5

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Tires

The video excellently explains that we cannot choose the tires for our van based solely on the size (e.g. 275/35 R19) but we must also check those numbers that follow, which are the load index (LI) and speed index (SI). First, we must find the weight plate, which is usually located on the driver's door pillar, where we need to look for the maximum load value on the front axle (e.g. from the video 1550 kg) and the maximum load value on the rear axle (1600 kg). Each axle has two tires so we must divide this value by 2: so front 775 kg per tire and rear 800 kg per tire. Now we need a conversion table, which can easily be found on the internet. The load index (LI) of 775 kg is 99 and of 800 is 100. To find the speed index (SI) there are also tables. Check the tires we are currently using, if the ones we want to mount have a higher index they are fine; they are more robust. A lower index, on the other hand, is not good, they could overheat. The advice from the youtuber is essential: if our tires have a load index lower than that of the weight plate, we cannot load the van to its maximum legal weight: it could be very dangerous.

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (2014-2025 / MK 6, T6) To reset the tyre pressure warning light on the Volkswagen Transporter, inflate the tyres to the correct pressure value: this value is indicated on t…
Volkswagen Transporter (2014-2025 / MK 6, T6) In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to go inflate the tires, bringing them to the recommended p…
Volkswagen Transporter (2014-2025 / MK 6, T6) Briefly, you will learn how to reset the tyre pressure warning light on the Volkswagen Transporter; before resetting the TPMS sensors, ensure that al…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos