Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the radio of the Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

Today's instructions will show us how to disassemble and replace the stock radio of the Volkswagen Golf. First, we get into the car and start prying on the side of the radio, removing the plastic cover; then we unscrew the mounting screws found on the sides, using a torx key or screwdriver, as shown in the video.

At this point, we disconnect the electrical wiring found on the back, replacing the radio with the new one; in this specific case, a new multimedia system is installed and adapted, following the video tutorial until the end!


Posted on 1 October 2025 by ScegliAuto


Related tutorials

How to Enter the Radio Code for the Volkswagen Golf
How to Enter the Radio Code for the Volkswagen Golf
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Today, let's discover how to retrieve and enter the code for the standard radio of the Volkswagen Golf, as well as the Jetta. First, get inside the v…
How to Enter the Radio Code for a Volkswagen Golf
How to Enter the Radio Code for a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you how to find and enter the radio code for your Volkswagen Golf, following the instructions below. First, get into the vehi…
How to Remove the Radio from the Volkswagen Golf - Jetta
How to Remove the Radio from the Volkswagen Golf - Jetta
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) The instructions in this guide will illustrate how to remove and replace the standard radio from the Volkswagen Golf, as well as the Jetta. First, ge…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos