Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the Start&Stop feature of the Volkswagen Transporter

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this guide, we will see how to deactivate the Start&Stop system of the Volkswagen Transporter, in simple and quick steps. First, we get on board the vehicle and start the engine; the Start&Stop system is always active at the first start of the engine and it will be possible to deactivate it by pressing the button that we find at the bottom next to the hazard lights button, as shown in the video.

To reactivate it, simply press the Start&Stop button again; to permanently deactivate this system, it will be necessary to use a specific programming software, to be connected to the OBD socket of the vehicle.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

How to Permanently Disable the Alarm System on a Volkswagen Transporter
How to Permanently Disable the Alarm System on a Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Briefly, we will go through the steps to permanently disable the alarm or anti-theft system on a Volkswagen Transporter. First, get into the driver's…
How to Deactivate the Internal Alarm on the Volkswagen Transporter T5
How to Deactivate the Internal Alarm on the Volkswagen Transporter T5
Volkswagen Transporter (2003-2014 / T5, MK 5) In today's tutorial video, learn how to deactivate the internal alarm on the Volkswagen Transporter, series T5, by following these simple steps. Insi…
How to Disable the Alarm on the Volkswagen Transporter?
How to Disable the Alarm on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To disable the alarm on the Volkswagen Transporter, locate the specific button that allows you to deactivate this function: this button is located in…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos