Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the panoramic sunroof of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Shortly, we will see the instructions that will allow us to reset and calibrate the sunroof motor of the Volkswagen Golf. First, we get into the car and start the instrument panel; we continue to press the opening button for another five seconds after it has finished its movement, thus calibrating the sunroof motor, as shown in the video.

At this point, we perform the same operation for closing the sunroof; all that's left is to verify the correct functioning afterwards.


Posted on 15 November 2025 by ScegliAuto


Related tutorials

How to Remove the Glass of the Panoramic Sunroof on the Volkswagen Golf
How to Remove the Glass of the Panoramic Sunroof on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, we will discover the instructions to remove and replace the glass of the panoramic sunroof on the Volkswagen Golf. First, get into the cabin a…
Guide to removing the panoramic roof of the Volkswagen Golf
Guide to removing the panoramic roof of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's guide will show you the main steps to remove and replace the panoramic roof of the Volkswagen Golf, GTI version. First, get into the vehicle …
How do you reset the panoramic roof of the Volkswagen Golf?
How do you reset the panoramic roof of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In order to reset the panoramic roof of the Volkswagen Golf, you need to turn on the instrument panel by inserting the ignition key into the correspo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos