Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the dome light of the interior lights of the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Interior dome light bulb

Today we will explain how to disassemble the interior light fixture on a Volkswagen Polo model 9. To disassemble the fixture, we need to remove the plastic cover around it and insert a flat-head screwdriver into the left corner to push it outwards. Disconnect the connector and carefully remove the fixture. After removing the fixture, insert a flat-head screwdriver into the side clips to open the fixture and replace the bulbs inside. After replacing the bulbs, close the fixture by hooking the bottom part and then push it back into its housing from the vehicle and mount the plastic cover.

Posted on 18 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Light Fitting on the Volkswagen Polo 6R
How to Remove the Interior Light Fitting on the Volkswagen Polo 6R
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In today's video, you will see how to remove the interior light fitting and replace the bulb on the Volkswagen Polo third series (6R), as well as on …
How to Change the Interior Bulbs on a 2018 Volkswagen Polo?
How to Change the Interior Bulbs on a 2018 Volkswagen Polo?
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The video author explains how to replace the interior lights (or courtesy lights) of the 2018 Volkswagen Polo. First, remove the ceiling light by gra…
How to Replace the Courtesy Lights of the Volkswagen Polo?
How to Replace the Courtesy Lights of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the courtesy lights of the Volkswagen Polo, remove the plastic cover located in front of the buttons to turn on the lights. To do this, si…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos