Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlining on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

To replace the headlining on a Volkswagen Polo, unscrew the screws securing all the obstructing elements, such as the side handles, sun visors, interior rear-view mirror, etc. Once the interior lights are also removed, detach the plastic covers from the door pillars to completely free the headlining. Now, the headlining can be extracted from inside the cabin by opening the rear hatch and sliding the piece out: this will allow you to insert the new piece and secure it properly.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the antenna on a Volkswagen Polo, open the tailgate to leverage an object and detach the headlining at the rear of the vehicle. Once the h…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this tutorial, you will see how to remove the headlining in a Volkswagen Polo, a very simple and quick operation. First, go inside the cabin, then…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Through this very useful guide, we can see how to remove the roof lining of a Volkswagen Polo 6R. Let's start by removing the four handles above the …

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos