Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sun Visor Light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Interior dome light bulb

See other generations:
Video tutorial

Before you can begin, sit in the driver's seat of your Volkswagen Polo. Start by inserting the tip of a thin but sturdy tool into the gap between the sun visor light and the car's headlining, then pry it out. Next, you will need to pull the light from the headlining of your Volkswagen Polo. At this point, disconnect the electrical connector that powers the light.

Once you have completed this step, you can properly remove the light, and you will have finished the disassembly.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To remove the sun visor from a Volkswagen Polo, free it from the internal clip located on the inner part of the visor. Use a tool to pry off the cove…
How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the sun visor from the Volkswagen Polo, you need to detach it from the internal clip located on the inside of the visor itself. Next, use a…
How to Remove the Sun Visor Clip on a Volkswagen Polo
How to Remove the Sun Visor Clip on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you notice that the clip securing the sun visor on your vehicle has broken, causing the visor to not stay in position, you can proceed with its re…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos