Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sun Visor on a Volkswagen Polo?

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the sun visor from a Volkswagen Polo, free it from the internal clip located on the inner part of the visor. Use a tool to pry off the cover of the support on the inner side of the sun visor, disconnect the connector inside, and loosen the underlying screw.

Once these elements are disconnected, connect the new visor to the respective connector, insert it into its housing, and secure it properly.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the sun visor from the Volkswagen Polo, you need to detach it from the internal clip located on the inside of the visor itself. Next, use a…
How to Remove the Sun Visor Clip on a Volkswagen Polo
How to Remove the Sun Visor Clip on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you notice that the clip securing the sun visor on your vehicle has broken, causing the visor to not stay in position, you can proceed with its re…
How to Remove the Sun Visor Light on a Volkswagen Polo
How to Remove the Sun Visor Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can begin, sit in the driver's seat of your Volkswagen Polo. Start by inserting the tip of a thin but sturdy tool into the gap between the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos