Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sun Visor Clip on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

If you notice that the clip securing the sun visor on your vehicle has broken, causing the visor to not stay in position, you can proceed with its replacement. Follow the instructions provided below and also take a look at the video.

First, you need to purchase an aftermarket clip compatible with this vehicle model. Then, use a plastic blade to remove the clip cover.

Underneath, you will find the two screws that need to be unscrewed to remove the base of the clip. Take the new clip and secure it with the screws.

After that, reposition and reattach the plastic cover, allowing you to reattach the sun visor.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the sun visor from the Volkswagen Polo, you need to detach it from the internal clip located on the inside of the visor itself. Next, use a…
How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To remove the sun visor from a Volkswagen Polo, free it from the internal clip located on the inner part of the visor. Use a tool to pry off the cove…
How to Remove the Sun Visor Light on a Volkswagen Polo
How to Remove the Sun Visor Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can begin, sit in the driver's seat of your Volkswagen Polo. Start by inserting the tip of a thin but sturdy tool into the gap between the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos