Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sun Visor on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the sun visor from the Volkswagen Polo, you need to detach it from the internal clip located on the inside of the visor itself. Next, use a tool to lever and detach the clips that secure the support of the internal part of the sun visor, also disconnecting the connector found on its inner side.

Once these elements are disconnected, connect the new visor to the corresponding connector, insert it into its housing, and secure it properly.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Replace the Sun Visor on a Volkswagen Polo?
How to Replace the Sun Visor on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To remove the sun visor from a Volkswagen Polo, free it from the internal clip located on the inner part of the visor. Use a tool to pry off the cove…
How to Remove the Sun Visor Clip on a Volkswagen Polo
How to Remove the Sun Visor Clip on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you notice that the clip securing the sun visor on your vehicle has broken, causing the visor to not stay in position, you can proceed with its re…
How to Remove the Sun Visor Light on a Volkswagen Polo
How to Remove the Sun Visor Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can begin, sit in the driver's seat of your Volkswagen Polo. Start by inserting the tip of a thin but sturdy tool into the gap between the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos