Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the Start&Stop feature of the Volkswagen Golf.

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this short guide, we will see the instructions on how to deactivate and activate the Start&Stop system of the Volkswagen Golf. First, let's get inside the car and start turning on the instrument panel and the engine; then, we press the Start&Stop button located on the central console, next to the gear shift knob, as shown in the video. At this point, we will see the Start&Stop warning light appear on the instrument panel display, indicating that the system is temporarily deactivated; we press the Start&Stop button again to reactivate the system.

Posted on 20 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today, in this video tutorial, see how to disable the start&stop function of the Volkswagen Golf TDI, following the instructions below. The start&sto…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The instructions in this guide will show you how to disable and enable the Start&Stop system on the Volkswagen Golf. First, get into the vehicle and …
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In this guide, you will discover the main instructions that will allow you to activate and deactivate the Start&Stop system in the Volkswagen Golf in…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos