Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the front headlights in the Volkswagen LT35 van?

Model: Volkswagen Lt Typ2d - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

Video tutorial

In this tutorial, we will see how to disassemble the front headlights on the Volkswagen LT35 van, a procedure that is extremely simple and quick. First, let's make sure that the instrument panel is turned off to operate safely.

Then, we open the hood, locate the three screws positioned around the perimeter of the headlight in question, and unscrew them using a cross-head screwdriver. Next, we detach the metal clip located at the back, disconnect the power connector, and separate the headlight from the frame.

At this point, all that's left is to replace the faulty element and reassemble everything by following the reverse procedure.


Posted on 6 January 2026 by ScegliAuto


Related tutorials

Volkswagen Lt (1996-2006 / Typ2d) The fuses of the Volkswagen LT can be found inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be p…
Volkswagen Lt (1996-2006 / Typ2d) In order to replace the timing belt of the Volkswagen LT, you need to lift the vehicle so that you can completely remove the front right wheel and re…
Volkswagen Lt (1996-2006 / Typ2d) On the Volkswagen LT, the replacement of the rear bumper is performed with the vehicle stationary and securely. Access to the fasteners is cleared by…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos