|
Do it yourself
| |||
| ||||
Replacing the Boot Lock on a Volkswagen Golf MK6
Model: Volkswagen Golf
MK 6, Golf VI, Golf 6, 5K1
- Years 2008-2012
In this video, we can see how to replace the damaged boot lock on a Volkswagen Golf MK6: after opening the lock from inside the boot using the appropriate lever, we examine the lock and see that there are indeed problems. We can find the replacement part, for example, on tarostrade.it with the code 60-0353-N-108382 at a price of £11.95 plus £6.49 for shipping. We need to unscrew the screws holding the internal cover of the tailgate; it won't be necessary to remove it completely, just move it slightly at the location of the lock, which we will remove with an 8 mm bit from both sides, and then disconnect the electrical connector located at the back. Take the new one and proceed in reverse: connect the connector, secure the two bolts, and then replace the plastic cover, fastening it with its screws. And that's it!
Updated on 29 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Today's steps will show us how to disassemble and replace the trunk lock actuator of the Volkswagen Golf. First, we open the rear hatch of the trunk …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
This brief and simple guide explains how to unlock the rear boot lock in case of an emergency for the Volkswagen Golf. First, open the rear doors and…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
In your Volkswagen Golf, the boot may become stuck due to a fault in the lock or the control button located in the cabin. In this case, you can perfo…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.429
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |