Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Sunroof of the Volkswagen Touran

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Convertible top

See other generations:
Video tutorial

Today, I will explain how to open and close the sunroof of the Volkswagen Touran model 2. To open the sunroof, get into the vehicle, close the front and rear doors, and turn on the ignition. After completing these initial steps, press the open button located next to the interior light.

Keep the button pressed until the sunroof is fully open or halfway for a less panoramic opening. To close the sunroof, press the close button located next to the interior light.

Keep the button pressed until it is fully closed.


Posted on 18 February 2026 by ScegliAuto


Related tutorials

How to Open the Boot Lid from Inside on the Volkswagen Touran MK1
How to Open the Boot Lid from Inside on the Volkswagen Touran MK1
Volkswagen Touran (2003-2015 / 1T, MK 1) In this video, you will see how to open the rear boot lid in case of emergency if it is stuck due to a malfunctioning electric lock, on the first ser…
How to Open the Boot of a VW Touran in an Emergency
How to Open the Boot of a VW Touran in an Emergency
Volkswagen Touran (2003-2015 / 1T, MK 1) When the lock of the boot on a 2009 Volkswagen Touran stops working, it means that it needs to be replaced. However, to carry out this operation, you…
Where to Find the Fuses in a Volkswagen Touran and How to Access Them
Where to Find the Fuses in a Volkswagen Touran and How to Access Them
Volkswagen Touran (2003-2015 / 1T, MK 1) The fuses in your Volkswagen Touran are located inside the fuse box. The fuse box is positioned at the lower left side of the steering column. To acc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos