Do it yourself
Frequently asked questions about cars and motorcycles

Location and Diagram of the Fuse Boxes of the Volkswagen Transporter T6

Model: Volkswagen Multivan T6 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuse box

See other generations:
Video tutorial

In this video, we see a general description of the positioning of the fuses in the Volkswagen T6 Multivan: the main compartments are shown, which are compartment A, located inside the engine above the battery; box B, which is also located within the engine compartment but covered by the bodywork of the compartment itself, at the front of the compartment, right side (when looking at the vehicle from the front).

Box C is located inside the cabin, to the left of the steering wheel for left-hand drive and to the right of the steering wheel for right-hand drive.

Box G is located under the left front seat, while box H is also under this same seat but at the front. The fuses in box J are always near the battery, while those in box K are located under the right front seat, outer side.

Box M is located at the lower part of the engine compartment.


Posted on 15 April 2026 by ScegliAuto


Related tutorials

Volkswagen Multivan (2003-2015 / T5, MK 2) In this video, see the diagram of the fuse boxes on the Volkswagen T5 Multivan, while this box indicates where the boxes containing the fuses are loc…
Volkswagen Multivan (2021-2026 / T7, MK 4) Today's information will allow us to access the fuse boxes, retrieving the diagram and their layout for the Volkswagen Multivan. First, let's open th…
Volkswagen Multivan (2003-2015 / T5, MK 2) Today we will look at the instructions that will allow us to access the internal fuse box of the Volkswagen Multivan, as well as the schematic and di…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos