Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Engine Oil and Filters on a Volkswagen Golf V Diesel

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Engine oil

See how to change the engine oil and filter on the Volkswagen Golf V diesel: Lift the car and place it on two sturdy axle stands, raise the bonnet and open the oil filler cap. From underneath the vehicle, open the drain plug and let all the oil flow into a large container, which you will then dispose of correctly at an authorised centre. While the oil drains, move to the filter, which is located in a metal casing with a central bolt. Before fitting the new filter, clean the sealing surface on the engine well, and lubricate the new seal with clean oil. The torque setting is 25 Nm for the filter and 20 Nm for the drain bolt (which you will replace with a new one along with its seal). The old filter also goes with the oil for disposal. Fill to 90% capacity with the oil specified by the manufacturer, start the engine for a few minutes, then check and top up as necessary.

Posted on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To change the engine oil on the Volkswagen Golf, lift the car so you can loosen the drain plug of the oil reservoir. Once this plug is removed, colle…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) If you need to change the engine oil of your Volkswagen Golf (year 2021), but you don't know the steps you need to follow, then all you have to do is…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) When the oil warning light comes on in a Volkswagen Golf, it means that it is necessary to proceed with the replacement of the engine oil and the rel…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos