Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the oil filter and engine oil of the Volkswagen Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Engine oil

The oil change on a Volkswagen Golf model 6 can be done independently with a few simple steps. We open the front hood and unscrew the oil tank cap to pour the pre-change liquid inside. After letting it sit for about 30 minutes in the tank, we lift the car to unscrew the oil pan screw and let the used liquid drain into a container. We place absorbent paper near the oil filter and, using a chain wrench, unscrew the flange by rotating it counterclockwise. We remove the flange and replace the filter. We lower the vehicle to the ground and pour the new motor oil into the tank.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx s…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's information will show us how to perform the routine maintenance service, replacing the engine oil and oil filter, on a Volkswagen Golf 2.0 TD…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, I will show you how to change the engine oil and filter on your Volkswagen Golf. It is not a very complex operation; just be careful. First, r…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos