Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Sump on VW Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Oil pan

How to replace the oil sump on a Volkswagen Golf 4, let’s see how. Lift the car on a column lift and unscrew the oil sump plug, allowing the oil to drain into a container. Unscrew all the fastening bolts of the oil sump and remove it from under the car. Use suitable sealant for the oil sump, apply it around the edge of the sump, and fit it under the engine. Tighten all the fastening screws. Lower the car back to the ground, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Top up with new oil and check the level.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx s…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) If possible, position the vehicle on suitable car ramps to facilitate access to the oil sump; then place a container under the drain plug and unscrew…
Engine Oil Removal and Replacement
Engine Oil Removal and Replacement
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) This video illustrates how to remove and replace the engine oil in your car. Before starting to remove the engine oil, it is advisable to start the c…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos