Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Replacement for Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Engine oil

In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx screws from the oil sump guard. Next, unscrew the oil drain bolt and allow the oil to drain completely. Remove the oil filter located underneath the vehicle using a socket wrench: replace it with the new one, ensuring the new seal is in place and install it correctly. Tighten everything to 18 Nm and replace the oil cap. Refit the sump guard, lower the vehicle, and proceed to pour in the new engine oil!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Replacing the oil filter on a VW Jetta? Let's look at removing the oil filter in the engine bay. Open the car's door and pull up the engine compartme…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, I will show you how to change the engine oil and filter on your Volkswagen Golf. It is not a very complex operation; just be careful. First, r…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's information will show us how to perform the routine maintenance service, replacing the engine oil and oil filter, on a Volkswagen Golf 2.0 TD…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos