Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

Replacing the oil filter on a VW Jetta? Let's look at removing the oil filter in the engine bay. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Use a socket wrench to unscrew the large fastening bolt of the container cap where the oil filter is located.

Remove the worn oil filter and position a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container.

Refill the engine with new oil.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Engine Oil and Oil Filter Replacement for Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to replace the engine oil and oil filter of a Volkswagen Golf 4. First, lift the car and remove the Torx s…
How to replace the oil filter and engine oil of the Volkswagen Golf 6
How to replace the oil filter and engine oil of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The oil change on a Volkswagen Golf model 6 can be done independently with a few simple steps. We open the front hood and unscrew the oil tank cap to…
How to Replace Engine Oil and Filter on a Volkswagen Golf
How to Replace Engine Oil and Filter on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, I will show you how to change the engine oil and filter on your Volkswagen Golf. It is not a very complex operation; just be careful. First, r…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos