|
Do it yourself
| |||
| ||||
How to Reset the Service Light on the Volkswagen Transporter T6
Model: Volkswagen Transporter
T6, MK 6
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
Below are the instructions to correctly reset the service light on your Volkswagen Transporter T6. The steps are very simple and quick. First, with the doors closed, turn on the ignition, which will indicate the warning light. Next, press the minus button until you find the "Trip" option on the vehicle display. Then, keep pressing the menu button until you see the mileage on the display. At this point, press and hold the call accept button for about one second, then the OK button for about five seconds. Using the controls on the steering wheel, scroll to the "Advanced Assistance" option, then go to "All Settings" and confirm with the OK button. Afterwards, repeatedly press the OK button and the back button until the reset is complete. Finally, turn off and then turn on the ignition to check if the light has disappeared; if not, contact a professional.
Posted on 21 May 2026 by ScegliAuto
Related tutorials
Volkswagen Transporter
(2014-2025 /
T6, MK 6)
Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…
Volkswagen Transporter
(2014-2025 /
T6, MK 6)
To reset the Service light on the Volkswagen Transporter, press and hold the 0.0 button located on the right side of the instrument cluster while it …
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
