|
Do it yourself
| |||
| ||||
Why the Passenger Climate Control Doesn't Work on Minimum in a Volkswagen Golf VII
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
The issue of the air conditioning blowing hot air from the passenger side when set to minimum (while the driver’s side is cold) is a common problem on Volkswagen Golf VII models. The YouTuber checked the V158 and V159 motors, which are functioning correctly. The compressor works, and the climatronic has been calibrated correctly. The air conditioning blowing hot air from one side is a classic symptom of low refrigerant charge; another possibility is that the thermal expansion valve (TXV) is stuck in a partially closed position. Therefore, the first step is to check the refrigerant charge and test the system's efficiency by measuring the temperatures within the circuit to see if the expansion valve is working correctly (this work should be done by a professional).
Posted on 1 June 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
On the Volkswagen Golf VII, the climate control menu opens from the central display. Locate the touch panel in the centre of the dashboard and press …
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
In order to replace the climate actuator of the Volkswagen Golf, you must first open the glove compartment on the passenger side: you will need to de…
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
In this video, we will see how to fix the problem of the front assist not working on the Volkswagen Golf VII: you will only need an OBDII reader to p…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |