Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Service warning light

In today's video, we will see how to reset the service light on a Volkswagen Golf, fifth generation model produced from 2003 to 2008. This operation is very simple and can be done independently after changing the engine oil and the corresponding filter. So let's start the reset procedure by pressing and holding the 00 button to the right of the speedometer, then turn on the vehicle's ignition without starting the engine, then release the 00 button and press the MIN button to reset the service and complete the task as shown in the video.

Posted on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light and Inspection Light on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This short video shows you how to reset the service light and inspection light on a Volkswagen Golf 7 after performing the usual service. Resetting t…
How to Reset the Service Light on a Volkswagen Golf?
How to Reset the Service Light on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The procedure we are about to see allows us to reset the service light on a Volkswagen Golf MK4, which is the fourth version of this model produced a…
How to Reset the Service Light on the Volkswagen Golf 5?
How to Reset the Service Light on the Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To reset the Service light on the Volkswagen Golf 5, press and hold the button located on the right side of the instrument cluster, which is labelled…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos