Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Temperature Sensor on a Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

Follow this guide to remove the coolant temperature sensor from the radiator of a Volkswagen Golf 4. Open the bonnet, lift it, and secure it with the prop rod. Disconnect the sensor's power connector and (if necessary, remove the engine soundproofing panel) carefully remove the sensor from its housing.

After comparing the damaged part with the new one, install it in the engine bay housing.

Test the car's proper functioning after installing the temperature sensor and all previously removed parts.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Replacement of the ambient temperature sensor of the Volkswagen Golf
Replacement of the ambient temperature sensor of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Below we will see the instructions that will allow us to disassemble and replace the ambient temperature sensor of the Volkswagen Golf. First of all,…
Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, you will see the main instructions on how to remove and replace the coolant temperature sensor from the engine of the Volkswagen Golf …
Replacing the Temperature Sensor
Replacing the Temperature Sensor
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The temperature sensor is used to measure the engine temperature. It is an electronic component whose resistance decreases as the temperature increas…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos