Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service and Maintenance Light on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

Video tutorial

Let's see the information that will allow us to reset the service light for the regular maintenance of the engine oil change on the Volkswagen Up. First, get in the vehicle and press and hold the "set" button located at the bottom right of the instrument panel; turn the key to position one to turn on the ignition, waiting about ten seconds before releasing the button.

At this point, press the left button once to confirm and execute the reset of the maintenance light from the instrument panel display.


Posted on 16 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Volkswagen Up
Resetting the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let’s look at the steps and instructions on how to reset the service light for routine maintenance on a Volkswagen Up. First, enter the cabin and pre…
Resetting the Service Light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Today, we will see how to reset the service light for the regular maintenance oil change on the Volkswagen Up, as well as the Seat Mii and Skoda Citi…
How to Reset the Inspection (Service) Light on a Volkswagen Up
How to Reset the Inspection (Service) Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Today we will see the necessary instructions to reset the service light for routine maintenance on a Volkswagen Up. First, get inside the cabin and p…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos