|
Do it yourself
| |||
| ||||
How to change the engine oil and filter on a Volkswagen Up! petrol.
Model: Volkswagen Up
MK 1
- Years 2011-2024
To quickly change the oil on a gasoline Volkswagen Up!, it is always advisable to disconnect the negative terminal of the battery and open the oil filler cap to facilitate draining. Raise the front of the car and place it on jack stands, then unscrew the oil drain plug and let it drain out: we will dispose of the used oil and filter at an authorized center. The filter is located at the top of the engine, easily accessible from above; place a container underneath the filter as oil will also drip from here. Clean the seating area and prepare the new filter by applying clean oil to the new gasket. Then screw the new filter on by hand until the gasket touches the seating; tighten it by 3/4 of a turn by hand, without damaging the gasket. Go back under the vehicle and replace the gasket and new plug on the oil pan: Lower the car and pour in about 90% of the oil tank's capacity (strictly adhere to the oil recommended by the manufacturer) and close the cap. Start the engine for 30 to 60 seconds to fill the filter, then turn it off and wait 5 to 10 minutes for all the oil to return to the pan. Measure and adjust the level until it is just below the "max" level.
Posted on 8 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Up
(2011-2024 /
MK 1)
Learn how to change the engine oil on your Volkswagen Up. Open the car door and pull up the engine bay release lever located at the bottom left of th…
Volkswagen Up
(2011-2024 /
MK 1)
How do you change the oil and engine filter on a Volkswagen Up? It's a simple operation if you follow the right steps, let's see how to proceed: lift…
Volkswagen Up
(2011-2024 /
MK 1)
Replace the engine oil and oil filter on a Volkswagen Up! 1.0 CNG. Use synthetic oil SAE 5W40. A strap wrench is needed to remove the oil filter. Fir…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on a Hyundai Tucson
Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.220
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |