Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Sump on a Volkswagen Jetta

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Oil pan

In this short and simple guide, you will learn how to remove and replace the engine oil sump on a Volkswagen Jetta, as well as on the Golf and Bora. First, lift the vehicle and begin draining the engine oil by unscrewing the drain plug and allowing the oil to flow into a container. Next, unscrew the fastening screws of the oil sump located on its sides to remove it. At this point, clean the base of the sump thoroughly, then replace its gasket with the original one. Refit the oil sump and pour in the new engine oil!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Replacement on Volkswagen Jetta
Oil Replacement on Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Do you want to replace the oil in the Jetta? Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard a…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (1998-2005 / A4, MK 4) Position the vehicle on suitable car ramps to facilitate access to the oil sump. Remove the plastic undertray and unscrew the drain plug from the oil…
Replace the Engine Oil and Oil Filter of the Volkswagen Jetta
Replace the Engine Oil and Oil Filter of the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) Follow these instructions to replace the engine oil and oil filter as part of the regular maintenance service for the Volkswagen Jetta. First, lift t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos