Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Oil on VW Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Engine oil

Learn how to change the engine oil on your Volkswagen Up. Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard and lift the bonnet, securing it. Remove the engine oil cap to top up. Lift the car and unscrew the oil filter: remove the worn oil filter and position a new one after draining the oil. Unscrew the oil pan bolt; drain the fluid into a container. After lowering the car, top up the new oil in the engine.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Service the Volkswagen Up! 1.0 CNG
How to Service the Volkswagen Up! 1.0 CNG
Volkswagen Up (2011-2024 / MK 1) Replace the engine oil and oil filter on a Volkswagen Up! 1.0 CNG. Use synthetic oil SAE 5W40. A strap wrench is needed to remove the oil filter. Fir…
How to change the engine oil and filter on a Volkswagen Up! petrol.
How to change the engine oil and filter on a Volkswagen Up! petrol.
Volkswagen Up (2011-2024 / MK 1) To quickly change the oil on a gasoline Volkswagen Up!, it is always advisable to disconnect the negative terminal of the battery and open the oil fi…
How to Change Oil and Engine Filter on Volkswagen Up
How to Change Oil and Engine Filter on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How do you change the oil and engine filter on a Volkswagen Up? It's a simple operation if you follow the right steps, let's see how to proceed: lift…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos